China (Mainland)
Silicone conductive inks CAS NO.63148-62-9
- FOB Price: USD: 25.60-25.60 /Kilogram Get Latest Price
- Min.Order: 10 Metric Ton
- Payment Terms: T/T,
- Available Specifications:
GOOD (10-1000)Kilogram
- Product Details
Keywords
- Silicone conductive inks
- Silicone spraying coatings
- Silicone graphite paints
Quick Details
- ProName: Silicone conductive inks
- CasNo: 63148-62-9
- Application: Mainly applied to silicone rubber Conn...
- DeliveryTime: 7days
- PackAge: 3KG/Bottle
- Port: Shekou
- ProductionCapacity: 10000 Metric Ton/Month
- Purity: 80%
- Storage: 3-6months
- Transportation: TNT ,Western union ,
- LimitNum: 10 Metric Ton
- Silicone conductive ink: Good adhesion
- Silicone conductive paints: good attachment
Superiority
Silicone conductive inks ,silicone graphite paints ,good conductive performance ,strong attachment to the silicone rubber,
Details
Silicone Rubber Electric Conductive Coating
PD-0403-4
PD-0403-4 is two components compound electronic conductive spraying coating. Characterized
by stable resistance value, strong adhesion, wear-resisting, glossy surface, tearing resistance and
other advantages.
Mainly applied to silicone rubber Connector, intermediate, lightning arrester and other silicone
rubber electric cable accessories.
Electronic Resistivity Rth:1KΩ ~3KΩ. (Space between measuring point＝10mm)
Application Method:
Process
Condition
Spraying viscosity
(Iwata 2# cup,
25 ℃ ) (S)
Spraying
distance
(cm)
Spraying
caliber
mm
Spraying
pressure
Mpa
Force Drying
(180-220℃)
Min
Coating 9-10 20-25 1.0/1.5 0.2-0.3 5-10 (dry to touch)
30-40 (hard dry)
1. Application Ratio：A: B=100 : 1 (A is coating ink, B is catalyst)
2. Pleases do stir evenly and filter with 200~300-hole mesh 200～300. Curing the ink after
spraying 30 minutes later.
3. The activity life of mixed ink is 8 hours.
4. Keeping constant temperature at 22℃and constant humidity when using conductive coating.
5. Please do make backflow of spraying gun every 15 minutes or mixing during continuous
operation for keeping the uniformity of coating and avoiding nonuniformity of electrical
resistance.
6. As the electric cable accessories relate to various shapes, if conditions allow, take the way of
hoisting automatic spraying or twice spraying would be better for resistance value when
coating on the silicone rubber electric cable accessories.
Note: Before first baking spraying 1-2 times or spraying over 8 areas, then spraying over 8
areas and curing again..
7. All the above data only for reference.
Curing Condition:
A.Vertical oven:Baking at 180℃ for 30minutes.
B.Horizontal oven:Baking at 220℃ for 20 minutes.
Attentions：
1. This agent including volatile solvent, please keep ventilating and far away from heat and open
flame.
2. Avoid skin contact for a long time and vapor inhalation, if happens,washing with soap once
skin contact.
3. The operating environment is important for coating process, please work in dust-free plant at
constant temperature 15～45℃ and constant humidity at 15～80%.
4. During the operating process, more dust pollution and more NG products, as the changing of
temperature and humidity, bad property of flowability and adhesion strength will be appeared by
low temperature, and the higher humidity will cause coating shrinkage cavity, the lower humidity
will cause potential safety hazard and whity by static.
Storage: Stored at room temperature for 6 months without mixing.This products has sediments
belong to the normal situation. Please shake well before using.
Packing: 1KG/Bottle